Biostar N4SLI-A9 Bedienungshandbuch PDF herunterladen (Seite 58)

N4SLI-A9

Primary / Secondary /Master / Slave PIO

The IDE PIO (Programmed Input / Output) fields let you set a PIO

mode (0-4) for each of the IDE devices that the onboard IDE interface

supports. Modes 0 to 4 will increase performance progressively.

In Auto mode, the system automatically determines the best mode

for each device.

The Choices: Auto (default), Mode0, Mode1, Mode2, Mode3, Mode4.

Primary / Secondary / Master / Slave UDMA

Ultra DMA/100 functionality can be implemented if it is supported by the IDE

hard drives in your system. As well, your operating environment requires a DMA

driver (Windows 95 OSR2 or a third party IDE bus master driver). If your hard

drive and your system software both support Ultra DMA/100, select Auto to

enable BIOS support.

The Choices: Auto (default), Disabled.

IDE DMA Transfer Access

The Choices: Enabled (default), Disabled.

Serial-ATA A

Enables support for Serial-ATA A.

The Choices: Enabled (default), Disabled

SATA DMA transfer

The Choices: Enabled (default), Disabled.

Serial-ATA B

Enables support for Serial-ATA B.

The Choices: Enabled (default), Disabled

SATA2 DMA transfe r

The Choices: Enabled (default), Disabled.

IDE Prefetch Mode

The Choices: Enabled (default), Disabled.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 69 70

Keine Kommentare

Biostar N4SLI-A9 Bedienungshandbuch Seite 58