Biostar P4TSE Bedienungshandbuch PDF herunterladen (Seite 11)

Dual Channel Guidelines

¾ Matched DIMM configuration in each channel:

- Same Density (128MB, 256MB, 512MB, or 1GB… etc.)

- Same DRAM technology (128M bit, 256M bit, or 512M

bit)

- Same ERAM bus width (x8 or x16)

- Both either single-sided or dual-sided.

¾ Matched in both Channel A and B memory slots.

- Populate symmetrical memory slots.

¾ Optimal platform performance with dual channel, DDR400,

matched DIMMs:

- Fully loaded configurations can be single or

double-sided DIMMS.

- Lightly loaded configurations need to be double-sided

DIMMS.

¾ When not using DDR400, best performance obtained wit:

- Symmetrical DIMM population and matched

double-sided DIMMs

- Lightly loaded configuration.

Dual Channel Configuration Table

DIMM Slot

DDRA 1 DDRA 2 DDRB 1 DDRB 2

System

Density

Lightly Loaded

Config.

128MB ~

1GB

128MB ~

1GB

256MB ~

2GB

Lightly Loaded

Config.

128MB ~

1GB

128MB ~

1GB

256MB ~

2GB

Fully Loaded

Config.

128MB ~

1GB

128MB ~

1GB

128MB ~

1GB

128MB ~

1GB

256MB ~

2GB

* DRAM Access Time: 2.5V unbuffered/ no registered (without ECC)

DDR SDRAM PC2100/2700/3200 type required.

* DRAM type: 128MB/256MB/512MB/1GB DIMM Module (184 pin).

DDR M odule installation

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining

chip snap back in place and the DIMM is properly seated.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 57 58

Kommentare zu diesen Handbüchern

Keine Kommentare

Biostar P4TSE Bedienungshandbuch Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motherboards Biostar P4TSE