Biostar M7VIT Pro Bedienungshandbuch PDF herunterladen (Seite 55)

M7VIT Pro BIOS Setup

IDE Primary / Secondary Master / Slave PIO

The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4)

for each of the IDE devices that the onboard IDE interface supports. Modes 0

through 4 provides successively increased performance. In Auto mode, the

system automatically determines the best mode for each device.

The Choices: Auto (default), Mode0, Mode1, Mode2, Mode3, Mode4.

IDE Primary / Secondary Master / Slave UDMA

Ultra DMA/100 functionality can be implemented if it is supported by the IDE

hard drives in your system. As well, your operating environment requires a DMA

driver (Windows 95 OSR2 or a third party IDE bus master driver). If your hard

drive and your system software both support Ultra DMA/100, select Auto to

enable BIOS support.

The Choices: Auto (default), Disabled.

VIA OnChip PCI Device

If you highlight the literal “Press Enter” next to the “OnChip PCI Device” labe l and then

press the enter key, it will take you a submenu with the following options:

VIA-3058 AC97 Audio

This option allows you to control the onboard AC97 audio.

The Choices: Auto (default), Disabled.

VIA-3068 MC97 Modem

This option allows you to control the onboard MC97 modem.

The Choices: Auto (default), Disabled.

VIA-3043 OnChip LAN

This option allows you to control the onboard LAN.

The Choices: Enabled (default), Disabled.

Onboard LAN Boot ROM

This item allows you to enable or disable Onboard LAN Boot ROM.

The Choices: Disabled (default), Enabled.

Super IO Device

If you highlight the literal “Press Enter” next to the “Super IO Device” labe l and then

press the enter key, it will take you a submenu with the following options:

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDC) installed on the

system board and you wish to use it. If install and FDC or the system has no

floppy drive, select Disabled in this field.

The Choices: Enabled (default), Disabled.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 67 68

Keine Kommentare

Biostar M7VIT Pro Bedienungshandbuch Seite 55